About us

TaylorMade unites the golfer and fitter with the most advanced technology to create Golf’s Ultimate Club Fitting Experience. Trusted by tour professionals around the world, what will a TaylorMade Performance Lab (TMPL) fitting do for your game?

Ask us a question

Submit

Contact Information

TaylorMade Golf Australia

1 Torteval Place

Clayton, VIC 3168

Australia

Hours of Operation

Monday 9:00am - 12:30pm
  1:00pm - 4:30pm
Tuesday 9:00am - 12:30pm
  1:00pm - 4:30pm
Wednesday 12:00pm - 1:30pm
  2:00pm - 5:30pm
  6:00pm - 7:30pm
Thursday 12:00pm - 1:30pm
  2:00pm - 5:30pm
  6:00pm - 7:30pm
Friday Closed
Saturday Closed
Sunday Closed

Session >

ULTIMATE CLUB FITTING (FULL BODY & BAG ) 2hr - $300

$300

Duration: 2 hours

One of our most popular fitting package is the Ultimate Club Fitting Experience, it uses GEARS 3D motion capture technology to capture both club and body. Gears Golf is a... (More)

One of our most popular fitting package is the Ultimate Club Fitting Experience, it uses GEARS 3D motion capture technology to capture both club and body. Gears Golf is a full swing club and body tracking system used by PGA pros, club fitters, and club manufacturers to measure and analyze every nuance of a swing, in full 3D, from address to follow-through.
Built on the same technology used by biomechanists and filmmakers, Gears is the most advanced motion capture solution developed specifically for golf.
This session covers Metalwoods, Irons, Wedges, Putter and Golf Ball. TaylorMade understands the importance of a properly matched, and optimized set for each player, making this a can’t-miss experience.
Using GEARS 3D motion technology and GC2 launch monitor, we can take a deeper dive into set make-up, which allows the player to have clubs all “work” with one another blending the feel of all golf clubs to be one in the same.
Careful thought is used to match Driver to Fairway, Fairway to Rescue (if used), into Irons, Wedges and Golf Ball recommendation, with the Putter being the last piece of the puzzle to be fit.

This session is not available through our Referral Partner Program.

FULL BAG TOTAL FITTING 1hr - $150

$150

Duration: 1 hour

The Full Bag Total Fitting Experience uses GEARS 3D motion capture technology to capture the club only. Our most popular fitting package is the Total Fitting Session. This... (More)

The Full Bag Total Fitting Experience uses GEARS 3D motion capture technology to capture the club only. Our most popular fitting package is the Total Fitting Session.
This session covers Metalwoods, Irons, Wedges, Putter and Golf Ball. TaylorMade understands the importance of a properly matched, and optimized set for each player, making this a can’t-miss experience.
Using GEARS 3D motion technology and GC2 launch monitor, we can take a deeper dive into set make-up, which allows the player to have clubs all “work” with one another blending the feel of all golf clubs to be one in the same.
Careful thought is used to match Driver to Fairway, Fairway to Rescue (if used), on to Irons, Wedges and Golf Ball recommendation, with the Putter being the last piece of the puzzle to be fit.
GEARS Golf is a full swing club tracking system used by PGA pros, club fitters, and club manufacturers to measure and analyze every nuance of a swing, in full 3D, from address to follow-through.
Built on the same technology used by biomechanists and filmmakers, Gears is the most advanced motion capture solution developed specifically for golf.

REFERRAL PARTNER PROGRAM

Duration: 1 hour

The Referral Partner Program is a session booked by your host club professional or Retail Professional. The fitter will use GEARS 3D motion capture technology to capture the... (More)

The Referral Partner Program is a session booked by your host club professional or Retail Professional. The fitter will use GEARS 3D motion capture technology to capture the club only and this session covers Metalwoods, Irons, Wedges, Putter and Golf Ball. TaylorMade understands the importance of a properly matched, and optimized set for each player, making this a can’t-miss experience.
Using GEARS 3D motion technology and GC2 launch monitor, we can take a deeper dive into set make-up, which allows the player to have clubs all “work” with one another blending the feel of all golf clubs to be one in the same.
Careful thought is used to match Driver to Fairway, Fairway to Rescue (if used), on to Irons, Wedges and Golf Ball recommendation, with the Putter being the last piece of the puzzle to be fit.
Gears Golf is a full swing club tracking system used by PGA pros, club fitters, and club manufacturers to measure and analyze every nuance of a swing, in full 3D, from address to follow-through.
Built on the same technology used by biomechanists and filmmakers, Gears is the most advanced motion capture solution developed specifically for golf.

METALWOOD FITTING 30min - $75

$75.00

Duration: 30 minutes

The Metalwood Fitting is what TaylorMade has always been known for. The fitter uses GEARS 3D motion capture technology to capture the club only & relevant swing dynamics. The... (More)

The Metalwood Fitting is what TaylorMade has always been known for. The fitter uses GEARS 3D motion capture technology to capture the club only & relevant swing dynamics. The use of a GC2 Launch Monitor is then used to capture all ball flight data and validate every aspect of Metalwood performance to the finest degree. With a wide selection of custom, stock shafts and heads to choose from, each player will leave this fitting session with the most optimized metalwood set possible.

GEARS Golf is a full swing club tracking system used by PGA pros, club fitters, and club manufacturers to measure and analyze every nuance of a swing, in full 3D, from address to follow-through.
Built on the same technology used by biomechanists and filmmakers, Gears is the most advanced motion capture solution developed specifically for golf.

IRON SET FITTING 30min - $75

$75.00

Duration: 30 minutes

This comprehensive fitting ensures the best performance out of TaylorMade irons. With many different iron shafts in varying flexes, lengths, and materials, along with every... (More)

This comprehensive fitting ensures the best performance out of TaylorMade irons. With many different iron shafts in varying flexes, lengths, and materials, along with every head available from TaylorMade. In this session the fitter will use GEARS 3D motion technology to capture the club only & relevant swing dynamics. The use of a GC2 Launch Monitor is then used to capture all ball flight data and validate every aspect of iron performance to the finest degree, to ensure correct set up of lie angle, shaft, head model and length, allowing you to hit more shots closer to the hole more often.

SHORT GAME FITTING 30min - $75

$75.0

Duration: 30 minutes

Most players understand how vital a solid short game is to low scoring, and while we can do a great job fitting wedge yardage gaps on a launch monitor, there is much more to... (More)

Most players understand how vital a solid short game is to low scoring, and while we can do a great job fitting wedge yardage gaps on a launch monitor, there is much more to it than full wedge swings. In this session, our fitter will take the player through a series of pitch shots on GEARS 3D motion technology (club only capture), which allows for a thorough reading for lie angle and type of bounce. Followed by testing for all other important aspects of the short game, ensuring the proper wedge combination.

PUTTER FITTING 30min - $75

$75.00

Duration: 30 minutes

The most important club in the bag, deserves the most attention in fitting. With the use of GEARS 3D motion technology (club only capture), this allows us to see the most... (More)

The most important club in the bag, deserves the most attention in fitting. With the use of GEARS 3D motion technology (club only capture), this allows us to see the most important factors in putting, in this session the fitter will explain these factors to the player and offer recommendations from TaylorMade’s putter line up to match up with the players putting technique.

Session

Book Now

FULL BAG TOTAL FITTING 1hr - $150

Duration: 1 hour
Cost: $150
The Full Bag Total Fitting Experience uses GEARS 3D motion capture technology to capture the club only. Our most popular fitting package is the Total Fitting Session. This session covers Metalwoods, Irons, Wedges, Putter and Golf Ball. TaylorMade understands the importance of a properly matched, and optimized set for each player, making this a can’t-miss experience. Using GEARS 3D motion technology and GC2 launch monitor, we can take a deeper dive into set make-up, which allows the player to have clubs all “work” with one another blending the feel of all golf clubs to be one in the same. Careful thought is used to match Driver to Fairway, Fairway to Rescue (if used), on to Irons, Wedges and Golf Ball recommendation, with the Putter being the last piece of the puzzle to be fit. GEARS Golf is a full swing club tracking system used by PGA pros, club fitters, and club manufacturers to measure and analyze every nuance of a swing, in full 3D, from address to follow-through. Built on the same technology used by biomechanists and filmmakers, Gears is the most advanced motion capture solution developed specifically for golf.

Book Now

IRON SET FITTING 30min - $75

Duration: 30 minutes
Cost: $75.00
This comprehensive fitting ensures the best performance out of TaylorMade irons. With many different iron shafts in varying flexes, lengths, and materials, along with every head available from TaylorMade. In this session the fitter will use GEARS 3D motion technology to capture the club only & relevant swing dynamics. The use of a GC2 Launch Monitor is then used to capture all ball flight data and validate every aspect of iron performance to the finest degree, to ensure correct set up of lie angle, shaft, head model and length, allowing you to hit more shots closer to the hole more often.

Book Now

METALWOOD FITTING 30min - $75

Duration: 30 minutes
Cost: $75.00
The Metalwood Fitting is what TaylorMade has always been known for. The fitter uses GEARS 3D motion capture technology to capture the club only & relevant swing dynamics. The use of a GC2 Launch Monitor is then used to capture all ball flight data and validate every aspect of Metalwood performance to the finest degree. With a wide selection of custom, stock shafts and heads to choose from, each player will leave this fitting session with the most optimized metalwood set possible. GEARS Golf is a full swing club tracking system used by PGA pros, club fitters, and club manufacturers to measure and analyze every nuance of a swing, in full 3D, from address to follow-through. Built on the same technology used by biomechanists and filmmakers, Gears is the most advanced motion capture solution developed specifically for golf.

Book Now

PUTTER FITTING 30min - $75

Duration: 30 minutes
Cost: $75.00
The most important club in the bag, deserves the most attention in fitting. With the use of GEARS 3D motion technology (club only capture), this allows us to see the most important factors in putting, in this session the fitter will explain these factors to the player and offer recommendations from TaylorMade’s putter line up to match up with the players putting technique.

Book Now

REFERRAL PARTNER PROGRAM

Duration: 1 hour
The Referral Partner Program is a session booked by your host club professional or Retail Professional. The fitter will use GEARS 3D motion capture technology to capture the club only and this session covers Metalwoods, Irons, Wedges, Putter and Golf Ball. TaylorMade understands the importance of a properly matched, and optimized set for each player, making this a can’t-miss experience. Using GEARS 3D motion technology and GC2 launch monitor, we can take a deeper dive into set make-up, which allows the player to have clubs all “work” with one another blending the feel of all golf clubs to be one in the same. Careful thought is used to match Driver to Fairway, Fairway to Rescue (if used), on to Irons, Wedges and Golf Ball recommendation, with the Putter being the last piece of the puzzle to be fit. Gears Golf is a full swing club tracking system used by PGA pros, club fitters, and club manufacturers to measure and analyze every nuance of a swing, in full 3D, from address to follow-through. Built on the same technology used by biomechanists and filmmakers, Gears is the most advanced motion capture solution developed specifically for golf.

Book Now

SHORT GAME FITTING 30min - $75

Duration: 30 minutes
Cost: $75.0
Most players understand how vital a solid short game is to low scoring, and while we can do a great job fitting wedge yardage gaps on a launch monitor, there is much more to it than full wedge swings. In this session, our fitter will take the player through a series of pitch shots on GEARS 3D motion technology (club only capture), which allows for a thorough reading for lie angle and type of bounce. Followed by testing for all other important aspects of the short game, ensuring the proper wedge combination.

Book Now

ULTIMATE CLUB FITTING (FULL BODY & BAG ) 2hr - $300

Duration: 2 hours
Cost: $300
One of our most popular fitting package is the Ultimate Club Fitting Experience, it uses GEARS 3D motion capture technology to capture both club and body. Gears Golf is a full swing club and body tracking system used by PGA pros, club fitters, and club manufacturers to measure and analyze every nuance of a swing, in full 3D, from address to follow-through. Built on the same technology used by biomechanists and filmmakers, Gears is the most advanced motion capture solution developed specifically for golf. This session covers Metalwoods, Irons, Wedges, Putter and Golf Ball. TaylorMade understands the importance of a properly matched, and optimized set for each player, making this a can’t-miss experience. Using GEARS 3D motion technology and GC2 launch monitor, we can take a deeper dive into set make-up, which allows the player to have clubs all “work” with one another blending the feel of all golf clubs to be one in the same. Careful thought is used to match Driver to Fairway, Fairway to Rescue (if used), into Irons, Wedges and Golf Ball recommendation, with the Putter being the last piece of the puzzle to be fit. This session is not available through our Referral Partner Program.